How To Check Usbasp Firmware Version

How to Check BIOS or UEFI Firmware Version in Windows 10 Your PC's motherboard will either have a BIOS or UEFI firmware chip. BIOS (Basic Input/Output System) is the firmware interface between a PC's hardware and its operating system. I got tired of ignoring the errors, so I bought a second one to update the first one with. I think I did everything right, but it ended up messing it up. I reversed operation and tried to restore the backup of the firmware, but it’s still not working. Windows says “device not recognized”.

Joined: Mon. Aug 24, 2015

Fivestar widget

Cheap USBASP programmer which you china buy on ebay, ali and others. Official project WebPage: JP1 – Supply Target – Choose between 5V and 3.3V. JP2 – Self Program – jumper on for self. AVR USBasp is an USB in-circuit programmer and can be used to program most of Atmel AVR microcontroller. It simply consists of an ATmega8 and a couple of passive components, i.e. Resistors, capacitors, LEDs and etc. This programmer uses a firmware-only USB driver and there is no special USB controller is needed. AVR USBasp came with 6-way cable.

Total votes: 0

Hi, I've modified the USBasp firmware from 2011-05-28 to add automatic speed detection, but I would like someone else to check over my work before I release it at large. I've done a bit of very basic testing to see if it works, mostly 'can it communicate' and 'can it read flash', but I don't have a large range of devices to check it on. If others could please read over the code and/or test its functionality that would be much appreciated, not only by me but by anyone that has had/will have to deal with ISP clock issues.

Thanks, Ignacio

Attachment(s):

Last Edited: Mon. Aug 24, 2015 - 04:51 PM

Rate this post

Downloader is a tool that is essential for the program to flash the microcontroller which typically uses ATMEGA chip. Most of my friends use the USB downloader type of ASP. Today there are types downloader ProgISP types sold in the market. physically to form between USBasp and USB ProgISP as follows

Problems often occur when using the USB downloader ProgISP. Among the OS does not recognize the driver, there is also a “USB Unrecognize”. To overcome this, there should be flashing firmware USBasp.

Step 1:

How To Check Usbasp Firmware Version Free

Prepare:
1. USBasp
2. USB ProgISP
3. Cord Jumper
4. Laptops / computers
5. Program flashing [Khazama / eXtreme Burner]
6. Firmware USBasp, download here

Step 2

Open the case and connect with jumper cables between USBasp with USB ProgISP using pin configuration

Pin 1 Pin 1

Pin 3 Pin 3

Pin 5 Pin 5

Pin 7 Pin 7

Pin 9 Pin 9

Jumpers on the bottom of USB ProgISP

Konfigurasi Jumper pada USB ProgISP

Step 4
Flashing using USBasp firmware

Flashing USB ProgISP dengan firmware USBasp

After flashing, release the jumper, then plug in the downloader into port usb

note : Red LED when firmware ProgISP, and Leb is blue when it is using firimware USBasp

Success Flashing to formware USBasp

After downloader blue and at check in “device manager” recognized as a significant process change firmware USBasp USB USBasp ProgISP be successful.

May be useful.

Usbasp Programmer Software

Usbasp Driver

Reference : http://www.sciencetronics.com/greenphotons/?p=938